Related products

• 

  Imer 1105842 WORKMAN II 250 Multi-Mixer

  <h4 class="product_title entry-title">Imer 1105842 WORKMAN II 250 Multi-Mixer</h4>   <span class="font-size small">Imer WORKMAN II 250 Multi-Mixer 1.5HP Electric Towable Multi-mixer</span> <span class="font-size small">Power Option: 110V or 220V/60Hz 1.5 HP, Single Phase</span> <span class="font-size small">Mix perfect Mortar, Stucco, Grout or Concrete</span> <span class="font-size small">The Workman II 250 and 350 Multimixers are the result of years of testing and development. The benefits and features deliver an unmatched value to the jobsite. Remove the drum in seconds,</span> <span class="font-size small">empty the drum in any position automatically, and rotate the drum without any external gears. Umatched by its competition.</span> <span class="font-size small">Drum capacity – 9 cu ft</span> <span class="font-size small">Batch output – 6 cu ft</span> <span class="font-size small">Drum diameter – 27-½ in</span> <span class="font-size small">Discharge outlet height – 27-¾ in</span> <span class="font-size small">Pneumatic wheels – 20 in</span> <span class="font-size small">Weight – 525 lbs</span> <span class="font-size small">Electric motor rating – 1.5 hp, 110/220v</span> <span class="font-size small">Length* – 72 (80) in</span> <span class="font-size small">Height* – 55 (68) in</span>

  Read more
• 

  ModelONE – One Man Auger

  <h4>ModelONE - One Man Auger</h4> The Ground Hog ModelONE is a small, hand-held, one-man auger that is designed from the ground up for Commercial and Rental use and also for a great end-user experience. Ground Hog Inc. has been making larger earthdrills for over 70 years and when we decided to build a smaller one-man machine, we wanted it to be the best. One-man earth drills have been around a long time and they haven’t changed much. We wanted to design a high quality machine that is improved and refined in every possible way. We think we have accomplished that goal. At the heart of the ModelONE is the transmission and it is designed to take abuse. A 3-inch centrifugal clutch transfers the engine’s power to heat-treated billet steel gears. Oversized bearings are used throughout. The sealed, grease-filled cast aluminum gearcase is heavily reinforced with ribbing to make it incredibly strong without adding unnecessary weight. All of this allows the transmission to easily handle the torque, shock and also the impact and side stresses on the auger bit. The handlebar is comfortable and the controls are easy to use. The full wrap-around handlebar has a thick and durable cushioned grip surface that gives comfort and control to the operator. There is a trigger-type, spring-return throttle that allows for precise control and a kill switch is located conveniently above the throttle. The handlebar and the gearcase are also designed to make the machine as short as possible to allow the operator to start digging a hole at a lower, more comfortable and controlled hand position. The ModelONE is rugged and reliable and is powered by a Honda® GX35 4-Stroke engine. The handlebar assembly is made from steel and has a durable powder coated finish. The ModelONE power unit and the auger bits themselves are optimized to work together as a system. The engine speed and torque, the transmission gear ratio, as well as the angle of the auger blades and the pitch of the flites, work together to provide maximum digging power while minimizing strain on the operator. With the ModelONE, you get plenty of power and control with less fatigue. The ModelONE has a 1-inch round auger drive and will handle up to an 8” auger bit. Bits are available in 2”, 4”, 6” and 8” and all of the bits are 36 inches long. The auger bits for the ModelONE feature a new, unique blade type that results in drastically longer blade life compared to other blade designs. Each blade can be rotated 180 degrees for a new cutting edge and the inner blades can be moved outward as the outer blades wear out. This gives you almost 6 times more life out of a set of blades on an 8” bit. Augers for the ModeONE use the same heavy-duty center Fishtail pilot as Ground Hog’s Combo and Standard series augers, which are used on much larger pieces of equipment. All of the ModelONE augers use the same blades and center pilots to make re-ordering easy. There is an available stand for the ModelONE that holds the power unit and 4 auger bits. The stand will also allow for the power unit to be hung with an auger attached. The stand with power unit and 4 augers takes up approximately 4.5 square feet of floor space and also has storage for extra auger drive pins. The ModelONE is available in an economical package that includes the Power Unit, Stand and 2”, 4”, 6” and 8” bits.

  Read more
• 

  OREC AHRC663- Track Cyclone Walk Behind Flail Mower

    <strong>A Walk Behind Flail Mower For Professionals</strong> The AHRC663 Walk Behind Flail Mower by Orec, The Cyclone (Track Drive Version), does the brush clearing and mulching for you! This brush-mulching beast can take down tall grass, weeds, brambles, and even small saplings. Add to that the thirty-eight flail blades that chew up and mulch the brush, and you have an all-in-one brush mower and mulching machine.

  Read more
• 

  Lincoln SP-140T Wire Feed Welder

  <div class=""> <div class="section-heading"> <div class="section-heading__title"> <h4 class="section-heading__text">Product Overview</h4> </div> </div> </div> <div class="desktop-content-wrapper"> <div class="grid"> <div class="col__7-12"> <div class="grid desktop-content-wrapper__main-description"> Whether you have a home project, farm repairs or basic auto body welding to complete, the Weld-Pak 140 HD should be at the top of your shopping list. Requiring common 120-Volt input power, the Weld-Pak 140 HD can be used almost anywhere. With simple 2 knob tapped control, the machine is easy to set up for gas-less flux-cored welding for deep penetration on thicker steel or gas-shielded MIG welding on thin gauge steel, stainless or aluminum. Compare the precise drive, rugged construction and full list of standard accessories. Lincoln Weld-Pak is an excellent choice. <div class="bullet-list-wrapper"> <ul class="bullet-list bullet-list--margin list list--type-square"> <li class="list__item">Wide 30-140 Amp welding output range is perfect for completing home projects, farm repairs or basic auto-body welding</li> <li class="list__item">3/16 in. single-pass or 5/16 in. multi-pass welding capacity with flux-cored wire</li> <li class="list__item">Precision full-adjustment drive system reduces the chance of wire tangling and crushing</li> <li class="list__item">Simple 2-knob tapped control is easy to set for gas-less flux-cored welding for deep penetration on thick steel or gas-shielded MIG welding on thin-gauge steel, stainless steel or aluminum</li> <li class="list__item">Plugs in wherever 120-Volt input power is available for versatility</li> <li class="list__item">No-hassle tool-less design for ease of use</li> <li class="list__item">Includes magnum 100L gun, cable assembly, contact tips, gas-less and gas nozzles, spindle adapter, gas regulator and work clamp</li> <li class="list__item">Includes 2 lb. spool of 0.025 in. MIG wire, 1 lb. spool of flux-cored wire, 0.025 in. and 0.035 in. drive roll and 0.030 - 0.045 in. knurled drive roll</li> </ul> </div> </div> </div> </div> </div>

  Read more