<h4>Bosch - Demolition Hammer</h4>
This Bosch Hammer delivers the best concrete removal rate in its class, impressive for a tool that weighs just 63 pounds. Providing 1,000 BPM and 43 Ft.-Lbs. of impact energy, this tool can handle heavy-duty applications such as outdoor asphalt work or indoor foundation removal. The breaker hammer with included deluxe cart is fully mobile and doesn't need a compressor, running on any 115/120V AC/DC, 15 Amp outlet or 2,500-watt portable generator. The Active Vibration Control system includes a longer air cushion in the hammer mechanism, which substantially reduces vibration levels at their source. Shock-mounted handles complete the vibration control system providing contractors with the lowest vibration levels possible without adding any size or weight to the tool.
Read more

<h4>Master - 215,000 BTU Kerosene Forced Air Heater</h4>
Product Type Direct-Fired Portable Oil & Kerosene Torpedo Heaters, Portability Wheeled Mounted, Heating Capacity Output 215,000 BtuH, Heating Area 5,375 sq ft, Tank Capacity 13 gal, Hours on One Filling 8 hr, Ignition Type Continuous Spark, Ignition Power Source Electric, On/Off Switch Included Yes, Fuel Gauge Included Yes, Power Failure Indicator Included Yes, Digital Temperature Readout Included Yes, LED Diagnostics Included Yes, Built-In Air Pressure Gauge Included Yes
<b>Features</b>
<ul>
<li>Length: 43 in</li>
<li>Hz: 60</li>
<li>NEMA Plug Configuration: 5-15P</li>
<li>Manufacturers Warranty Length: 1 yr Limited</li>
<li>Standards: CSA</li>
<li>Width: 24 in</li>
<li>Hours on One Filling: 8 hr</li>
<li>Item: Portable Oil and Kerosene Torpedo Heater</li>
<li>Amps AC: 2.8 A</li>
<li>Features: Built-In Calibrated Air Pressure Gauge, Automatic Safety Shut Off, Power On/Off Switch, Extension Cord Wrap, Built-In Thermostat, Digital Temperature Readout and LED Diagnostics, Fuel Gauge</li>
<li>Cord Length: 3 in</li>
<li>Tank Capacity: 13 gal</li>
<li>Heater Voltage: 120V AC</li>
<li>Air Flow: 670 cfm</li>
<li>Height: 26 in</li>
<li>Built-In Thermostat: Yes</li>
<li>Fuel Type: Diesel, Kerosene</li>
<li>Heating Area: 5,375 sq ft</li>
<li>Includes: Easy Lift Handles and 10 in Wheels</li>
<li>Safety Features: Automatic Safety Shut-Off</li>
<li>Fuel Consumption: 1.6 gph</li>
<li>BtuH Output: 215,000</li>
<li>Voltage: 120VAC</li>
<li>Heating Method: Fan Forced</li>
<li>Flame-Out Sensor Included: Yes</li>
<li>Tank Capacity/Hours on One Filling: 13 gal/8 hr</li>
<li>Overall Depth: 24 in</li>
<li>Ignition Power Source: Electric</li>
<li>Automatic Safety Shut-Off Included: Yes</li>
<li>Amperage: 2.8 A</li>
<li>LED Diagnostics Included: Yes</li>
<li>Thermostat Included: Unit-Mounted</li>
<li>Heating Capacity Output: 215,000 BtuH</li>
<li>Firing Type: Direct-Fired</li>
<li>Overall Length: 43 in</li>
<li>Thermal Overheat Protection: Automatic Reset</li>
<li>Fuel Gauge Included: Yes</li>
<li>Digital Temperature Readout Included: Yes</li>
<li>Power Failure Indicator Included: Yes</li>
<li>Overall Height: 26 in</li>
<li>Ignition Type: Continuous Spark</li>
<li>Product Type: Direct-Fired Portable Oil & Kerosene Torpedo Heaters</li>
<li>Built-In Air Pressure Gauge Included: Yes</li>
<li>On/Off Switch Included: Yes</li>
<li>Portability: Wheeled Mounted</li>
<li>Frequency: 60 Hz</li>
</ul>
Read more

<h4>Bluebird - Chipper</h4>
The Bluebird CH400 chipper is a 13-horsepower gas-powered commercial wood chipper or shredder with a Honda GX390 engine. The chipper uses a cutting mechanism to cut branches into chips or mulch. The CH400 can chip up to a four-inch diameter limb or branch.
The CH400 has an in feed throat opening that is six-inches by five-inches and a discharge chute that is 36-inches above the ground. It features two double-edged reversible hardened steel cutting blades. This model is towable behind a lawn or garden tractor, ATV, or UTV with the optional Off-Road Tow Package. It is self-feeding and can hold up to 204.8 fluid ounces (1.6 gallons) of fuel. The chipper weighs 300 pounds but includes two wheels for maneuverability. The chipper also includes four lift handles for loading, unloading, and portability. Its frame is made of welded six gauge steel for durability.
The CH400 model is “CARB compliant,” meaning that the chainsaw meets the California Air Resources Board’s rules and regulations for air pollution. It also features an emergency stop control on the in-feed chute and engine safety switches in case of emergencies.
Read more
<h4>American Sanders - EZ-8 Drum Sander</h4>
The EZ-8 drum sander combines professional contractor-type floor sanding results with highly productive, easy-to-use equipment features for the do-it-yourselfer. The EZ-8 comes apart easily for transportation to and from the work site. An enclosed motor eliminates overheating, and the drum lowering lever lets you “feather” the drum like the pros.
<strong>Features:</strong>
<ul>
<li>Heavy duty 1-1/2 hp dual capacitor motor provides power for the most demanding jobs.</li>
<li>Disassembles easily for transport or storage.</li>
<li>Totally enclosed dust free motor eliminates motor cleaning.</li>
<li>40 ft. gray rubber covered power cable provides longer reach.</li>
</ul>
Read more
Reviews
There are no reviews yet.